FOR BEST RESULTS, APPLY DECALS IN DRY ENVIRONMENT WITH TEMPERATURE AT LEAST 55 DEGREES FAHRENHEIT

STEP 1: Surface Prep
Clean the area thoroughly with our decal preparation spray. If you don’t have our prep spray, you can use isopropyl rubbing alcohol. Do not use Windex or similar products because most of these products are ammonia based and it will leave a residue behind that will prevent the sticker from adhering correctly or cause air bubbles. Be sure to remove all wax, shine, or oil residue from your surface before application. Make sure that the surface is completely dry before moving onto step 2.

STEP 2: Sticker Prep
Prepare the sticker for application by firmly rubbing a squeegee or credit card across the transfer tape. This removes any air bubbles that may have formed during shipping and makes the sticker cling to the transfer tape.

STEP 3: Peel Away
Lay your decal face down and peel the white grid paperbacking off the sticker. If the sticker clings to the paper backing, slowly replace the paper backing and repeat Step 2.

STEP 4: Place
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.

STEP 5: Finishing Touches
Slowly peel the transfer tape off at an angle almost parallel to the surface of application. Be careful not to pull the sticker off the surface. Repeat step 4 if the sticker pulls away from the surface.

Step 6: Admire your freshly installed decal.